点击图片查看原图
通过认证
FOSC400M33 fiber optic splice closures are specially designed to protect joints of optic cable. Excessive
fibers can be stored in storage baskets behind the splice trays. The optical fibers are fusion on sides of the tray. One
tray can splice 24 fibers; Available for 2 trays to splice total 48fibers. Adopt modified PP material, with anti-UV,
anti-aging and corrosion resistance material. Good quality and long service life. It is reusable.
Packing List:
Packing Nunber(pcs) Outer Box Size(mm) Inner Box Size(mm) Weight(kg)
8 540*630*425 1.8-2.5
Application :
It can be installed in aerial locations, ducted applications, direct buried, manholes. Small volume but large capacity.
Model Trays
Tray
capacity
Total Capacity
(fibers)
Dimension
mm
Entry Port dia. Raw material
FOSC4
00M33
2 24 48
359*277*12
0
2 inlets and 2 outlets <25mm
16round ports for drop cable
Dome & base :
Modified P.P
+GF
Tray: ABS
Sealing Method Mechanical and heat-shrinkable seals
Structure Diagram:
Features:
1. Excessive fibers can be stored in storage baskets. Easy in fiber management.
2. Fully mechanical sealing. Easy installation and reentry. No other sealing adhesive tape is needed.
3. base and dome sealed with clamp and O-ring system. Cable entry ports sealed with rubber.
4. The splice trays are hinged for access to any splice tray, without disturbing other trays.
5. The inner parts and fixing parts are made of stainless steel
6. With a earthing device protect it from damage by lightning
7. Compatible with most cable types(single fiber or ribbon), and cable constructions(loose tube, central core, slotted
core, modular). And the product can be used in any environment (aerial, buried, handhole, manhole)and in many
applications(tap-off, expressed, branch, and repair)
Technical Parameter:
1. Working Temperature: -40 degrees centigrade~+70 degrees centigrade
2.Atmospheric Pressure: 70~150Kpa
3.Axial Tension: >2000N/1min
4. Stretching Resistance: 2500N/10 square centimetre(1min)
5. Insulation resistance: >2*104MΩ
6. Voltage Strength: 15KV/1min, no arcover or breakdown
7. Pressure in the water: 50m/72hours
8. Splice tray with optical taking-in radius: 30mm. Low optical loss.
